and the rear idlers have the rear chain to cross once to reverse the drive and the keep the chain in line with the chain rings
The middle idlers to keep chain tension and to have the chain going straight on to the chain rings.
Here is port side of the jACK sHAFT where the chains come together as one.
The whole trike messily stitched together can ya see the reinforcement changes.
Tuesday, June 9, 2009
oh parts, all the parts
Well here i am working on the trike about a month ago.
I am setting up the rear derailleur to try to get it ready test ride. Unfortunately we found it to be a bit unstable so we could not take on a ride that night for we had to stabilize it.
We did and you well see in the next post i make today.
The Front seat.
The rear seat.
also we have just put the chain on to find out where to put the idlers.
Rear cassette
The Jack Shaft for transferring the drive the two peddlers on the port side to the starboard side where all the gears are.
I am setting up the rear derailleur to try to get it ready test ride. Unfortunately we found it to be a bit unstable so we could not take on a ride that night for we had to stabilize it.
We did and you well see in the next post i make today.
The Front seat.
The rear seat.
also we have just put the chain on to find out where to put the idlers.
Rear cassette
The Jack Shaft for transferring the drive the two peddlers on the port side to the starboard side where all the gears are.
Labels:
bamboo,
bike,
cirquepunk,
diy,
electric assist,
hpv,
human powered vehicle,
recumbent,
regenerative brake,
trike
Subscribe to:
Posts (Atom)